The Airload Environmental (300) Pumps are designed for handling heavily laden sludge’s and slurries normally considered impossible with conventional pumps.
The Airload (300) is a portable compressed air powered unit, intrinsically safe and low in height making it particularly suitable for applications in underground mining and tunnelling. It can pass solids up to 50mm in lump size. Unlike conventional pumps, which rely on vacuum displacement, The Airload 300 generates a high velocity suction airflow (17cu.mtr.min./600cfm.) combined with a powerful vacuum (-0.88 Bar/26″HG.) resulting in very effective suction performance.This enables the thickest and most viscous of materials to be suction loaded with horizontal distances in excess of 100 mtrs.and vertical suction lifts of up to 35mtrs. being achievable. Material is discharged from the pumping vessel by compressed air with transport distances over 150 mtrs. horizontally and heads of up to 25 mtrs. easily achieved even with high solids content materials.
PERFORMANCE – With no moving parts in contact with the material, large lump solids inclusions, waxy, fibrous and abrasive materials may be handled. Performance is dependant on the type of material being handled, the suction lift and the discharge run. Flowable slurries are recovered at a higher rate than viscous sludges.
APPLICATIONS -Safe for hazardous area operation and removal of material from confined locations.
Typical uses include: – sump cleaning, face slurry removal, pump lodge desilting, winding shaft sump cleaning, tank cleaning, sewer cleaning, mining services, culvert cleaning and pond desilting.
A compact, fixed or semi-fixed, compressed air operated pneumatic vacuum recovery unit which has the same high vacuum capability as the 300 4×4 model. Featuring gravity discharge for applications where pressure pipeline discharge is not required and/or the material to be recovered is a powder or dry solid.
The Airload 500 is our most powerful unit designed specifically for heavy bitumous product and sand and rust laden crudes. Particularly good for FPSO, tank farm and lagoon jobs.Will load solid material. Capable of very high vertical suction lifts.
The Airload 500 is a portable, compressed air powered unit, totally intrinsically safe and capable of passing solids up to 110mm in lump size. Unlike conventional pumps, which rely on vacuum displacement, the Airload 500 generates a high velocity suction airflow (25cu.mtr.min./750cfm.) combined with a powerful vacuum (-0.85 Bar/25″Hg.) resulting in aggressive suction performance. This enables the thickest and most viscous of materials to be suction loaded with horizontal distances in excess of 70 mtrs. and vertical suction lifts in excess of 30mtrs. being achievable. Material is discharged from the pumping vessel by compressed air with transport distances over 150 mtrs. horizontally and heads of up to 60 mtrs. easily achieved even with high solids content materials.
So if you want more info about any of these products and many more contact Airload Environmental Ltd